v50 Steam/Premium information for editors
  • v50 information can now be added to pages in the main namespace. v0.47 information can still be found in the DF2014 namespace. See here for more details on the new versioning policy.
  • Use this page to report any issues related to the migration.
This notice may be cached—the current version can be found here.

User:Larix/Adder

From Dwarf Fortress Wiki
Jump to navigation Jump to search

I do not claim credit for the concepts presented here. I may have been the first to actually build the first schematic and fully optimised the second, but used ideas and concepts worked out by others, of special note being Jong.

Optimised for performance[edit]

The core design can be used to build a mechanical adder that instantly generates the correct sum output, without intermediate steps. All credit for that achievement has to go to Jong (and maybe other posters for discussion input). The incredibly clever trick is that the sum at each bit can also be calculated as:

A = B and Carry-in or A != B and no Carry-in

The basic gear pattern is capable not only of calculating all carries and providing them as power output, but also of calculating all "no-carries", and similarly outputting power if no carry is sent. This evidently requires two carry-calculation assemblies, one for positive and one for negative, sending power or no power to two separate input-operated "summation gears". The gear which is driven by the carry input is engaged when A and B input have the same value, the gear taking power (if present) from the no-carry input is engaged when A and B inputs have different values. Both summation gears can work on the same power-to-signal converter.

This design generates the actual sum of the addition instantly, at the cost of a significantly higher component count. But for the central adding machine of a substantial dwarven computer, instant results should be worth the price.

Jong brought up and in fact finalised this design. The complete schematic can be found on page 18 of Jong's dwarfputer design document, although it was not used in his dwarven computer:

https://docs.google.com/document/d/1b7NN-ZGpBMggiVSkSpW499MdCNCpwccL-RA9HKLZ5NU/edit?pli=1

Optimised for minimum size[edit]

Alternatively, an extremely compact full adder can be built. All carries are calculated instantly, the sum output is correct after about 120 steps, since the design uses internally-generated signals as summation input and regularly triggers temporary false positives.

O1-SPABC-O2
       X
       c

P = Power

A,B = gear assemblies connected to the A and B inputs, active when the signal is on

C = gear assembly generating the carry output for this bit. The gear is not linked to any inputs and presence of power on it serves as carry input for the next higher bit.

X = a single gear assembly, connected to both A and B inputs, pre-toggled. It transmits power if one and only one of the inputs is on (an XOR gate).

c = carry input from the next lower bit. Like the output, an unconnected gear, presence of power on the gear serves as carry input.

S = the sum calculation, consisting of a single gear, connected to the A and B inputs as well as a signal generated by the carry input, pre-toggled. It transmits power when exactly one or three of the inputs are on.

O1 = power-to-signal converter or other output device to generate the sum output

O2 = output generating a signal from the carry, required to calculate the next higher bit's sum.

A carry is generated at a bit only when both A-line and B-line input are on. An active carry will be passed to the next higher bit if one and only one of A and B inputs are on; if both A and B are on, the carry will simply be generated again, the "X" gear will be disengaged and will not transport power. This easily prevents higher-bit carries erroneously flowing down the bit chain. All carries are effectively generated by providing power links between the power sources and the carry gears, i.e. they're present the moment the connecting gears get switched, without any further processing required. The logic conditions for an active carry are (A AND B) OR (CARRY_IN AND (A XOR B)). The carry calculation doesn't distinguish between active and inactive carry input when both A-Line and B-Line input are on, and in fact this distinction is irrelevant for carry calculations. Likewise, the sum calculation only checks whether an even or odd number of the inputs (A, B and Carry-in) are active, the exact number doesn't matter and is ignored.

  • This adder takes a mere five installed gear assemblies per bit - four for the carry calculation and one for the sum. Additional mechanisms and machinery are required for power supply, signal generation and linkage.
  • The adder can easily be expanded to also serve for subtraction. It only requires inverting all inputs from A in the carry chain. Converting numbers into their binary complement can also be included into the device, mainly by additional switch logic; the only additional building required is one gear assembly for the entire machine.

Further optimisation is possible, to make it even more space- and power-economical. The carry gear can be replaced by a roller running a minecart-based power-to-signal converter, saving three points of power requirement and removing the need for a dedicated "output" machine - a single-tile roller transmits power in all four compass directions on the same z-level, which is all we need here. The track for minecart power-to-signal converters can be carved/laid under gears and axles without hindrance, allowing to minimise space consumption. Optimising for minimal space and power consumption, i built an adder/subtracter working on 16-bit numbers, which takes up 205 tiles of open floor, plus 32 for required surrounding walls which could be shared with neighbouring adders and should not pull more than 380 power in operation. This breaks down to 14 tiles and 24 power per bit. The adder is contained on a single z-level and all sum and carry signals are generated within the mentioned area.

Demonstrated in its full cluttered glory here: http://www.bay12forums.com/smf/index.php?topic=135141.msg4884365#msg4884365 Compared with older efforts, it is remarkably more compact per-bit than the smallest full-adder designs posted on this wiki, and has subtraction and binary complement generation (for the display of negative subtraction results) fully installed already.